Subscriptions
Get Mail on new products
Tel:+86-28-8686 8787
Fax: 86-28-6890 9065
info@TOPLNG.com
TOPLNG@hotmail.com
Skype: TOPLNG
www.TOPLNG.com
LNG
The heating value depends on the source of gas that is used
admin 2015-01-30 07:29:28
The heating value depends on the source of gas that is used and the process that is used to liquefy the gas. The range of heating value can span +/- 10 to 15 percent. A typical value of the higher heating value of LNG is approximately 50 MJ/kg or 21,500 Btu/lb. A typical value of the lower heating value of LNG is 45 MJ/kg or 19,350 BTU/lb.
For the purpose of comparison of different fuels the heating value may be expressed in terms of energy per volume which is known as the energy density expressed in MJ/liter. The density of LNG is roughly 0.41 kg/liter to 0.5 kg/liter, depending on temperature, pressure, and composition, compared to water at 1.0 kg/liter. Using the median value of 0.45 kg/liter, the typical energy density values are 22.5 MJ/liter (based on higher heating value) or 20.3 MJ/liter (based on lower heating value).
The (volume-based) energy density of LNG is approximately 2.4 times greater than that of CNG which makes it economical to transport natural gas by ship in the form of LNG. The energy density of LNG is comparable to propane and ethanol but is only 60 percent that of diesel and 70 percent that of gasoline.
Maybe you are looking for :
• LNG Pump Skid
• LNG Dispenser
• LNG Tank
• Turnkey LNG Station Solution
Maybe you are looking for :
• LNG Pump Skid
• LNG Dispenser
• LNG Tank
• Turnkey LNG Station Solution